用VB设计更换屏幕保护的程序

发表于:2007-07-14来源:作者:点击数: 标签:
杜运庆 制作一个本企业的屏幕保护,在客户运行本企业的应用软件的时候,为客户更改屏幕保护,是个广告宣传的好办法。在第一 VB 论坛(http://www.d1vb.com)上有很多朋友提出这个问题,现解答如下: 要更换屏幕保护,首先得做好一个屏幕保护(scr文件),本例以
杜运庆

  制作一个本企业的屏幕保护,在客户运行本企业的应用软件的时候,为客户更改屏幕保护,是个广告宣传的好办法。在第一VB论坛(http://www.d1vb.com)上有很多朋友提出这个问题,现解答如下:

  要更换屏幕保护,首先得做好一个屏幕保护(scr文件),本例以 工程1.scr 这个文件为例。由于windows是把屏幕保护文件存放在system下,但记录屏幕保护文件位置的文件却是windows目录下的system.ini,所以,首先需要找出系统的windows和system目录的确切安装位置。因此,可以分如下几步进行:

  1、找到windows和system目录的安装位置

  2、把屏幕保护文件复制到system目录下

  3、在system.ini中的[boot]中写入:

    SCRNSAVE.EXE=C:\WINDOWS\SYSTEM\工程1.SCR

  4、告诉系统切换屏幕保护。

  下面的例子成功地改变了屏幕保护,全部源代码如下:

'得到windows目录

Private Declare Function GetWindowsDirectory Lib "kernel32" Alias "GetWindowsDirectoryA" (ByVal lpBuffer As String, ByVal nSize As Long) As Long

'修改system.ini
Private Declare Function WritePrivateProfileString Lib "kernel32" Alias "WritePrivateProfileStringA" (ByVal lpApplicationName As String, ByVal lpKeyName As Any, ByVal lpString As Any, ByVal lplFileName As String) As Long

'得到system目录
Private Declare Function GetSystemDirectory Lib "kernel32" Alias "GetSystemDirectoryA" (ByVal lpBuffer As String, ByVal nSize As Long) As Long

'设置屏幕保护
Private Const SPI_SETSCREENSAVETIMEOUT = 15
Private Const SPI_SETSCREENSAVEACTIVE = 17
Private Const SPIF_UPDATEINIFILE = &H1
Private Const SPIF_SENDWININICHANGE = &H2

Private Declare Function SystemParametersInfo Lib "user32" Alias "SystemParametersInfoA" (ByVal uAction As Long, ByVal uParam As Long, ByVal lpvParam As Long, ByVal fuWinIni As Long) As Long

'启动屏幕保护
Private Declare Function SendMessage Lib "user32" Alias "SendMessageA" (ByVal hwnd As Long, ByVal wMsg As Long, ByVal wParam As Long, lParam As Any) As Long

Private Const WM_SYSCOMMAND = &H112
Private Const SC_SCREENSAVE = &HF140

Private Sub Form_Load()
 '得到system目录
 Dim sSave As String, Ret As Long
 sSave = Space(255)
 Ret = GetSystemDirectory(sSave, 255)
 sSave = Left$(sSave, Ret)
 '把屏保复制到系统目录
 FileCopy App.Path & "\工程1.scr", sSave & "\工程1.SCR"
 '得到windows目录
 Dim Path As String, strSave As String
 strSave = String(250, Chr$(0))
 Path = Left$(strSave, GetWindowsDirectory(strSave, Len(strSave)))
 '修改system.ini
 Dim r As Long
 Dim iniPath As String
 iniPath$ = Path + "\system.ini"
 r = WritePrivateProfileString("boot", "SCRNSAVE.EXE", sSave & "\工程1.SCR", iniPath)
 '设置时间间隔为1分钟=60秒
 lRet = SystemParametersInfo(SPI_SETSCREENSAVETIMEOUT, 60, ByVal 0&,  
     SPIF_UPDATEINIFILE + SPIF_SENDWININICHANGE)
 '设置屏幕保护
 retval = SystemParametersInfo(SPI_SETSCREENSAVEACTIVE, True, 0, 0)
 '启动屏幕保护
 Dim result As Long
result = SendMessage(Form1.hwnd, WM_SYSCOMMAND, SC_SCREENSAVE, 0&)
End Sub

  本例在vb6.0+win95下运行通过。

原文转自:http://www.ltesting.net