Quidway start booting

(M)odify any of Quidway router configuration or (C)ontinue? [M] M

For each of the following questions, you can press to select the

value shown in braces, or you can enter a new value.

NETWORK INTERFACE PARAMETERS:

Do you want a LAN interface?  [N] y

This board's LAN IP address? [169.254.10.10] 10.0.0.1  

Subnet mask for LAN (0 for none)? [255.255.0.0] 255.255.255.0

TFTP SERVER PARAMETERS:

IP address of the TFTP server? [169.254.75.166] 10.0.0.254

What is the name of the file to be loaded and started? [m8240ram.arj] Q263XE-36XXE-V1.63-002.BIN

How long (in seconds) should CPU delay before starting up? [5]

-----------------------------------------------------

NETWORK INTERFACE PARAMETERS:

  IP address on LAN is 10.110.50.1

  LAN interface's subnet mask is 0xfffff800

HARDWARE PARAMETERS:

  Processor type is MPC8240

  Internal Clock Rate 250 Mhz

  External Clock Rate 100 Mhz

  LAN Controller is Intel 82559

  Serial channels will use a baud rate of 9600

TFTP SERVER PARAMETERS:

  IP address of the TFTP host is 10.110.51.11

  The file to download and start is a

  After board is reset, start-up code will wait 5 seconds

----------------------------------------- (M)odify any of Quidway router configuration or (C)ontinue? [M] c

      ******************************************

      *                                        *

      *  Quidway Series Router Bootrom, V4.32  *

      *                                        *

     ******************************************

  Copyright(C) 1999-2001 by HUAWEI TECH CO., LTD.

  Compiled at 17:47:11 , Mar 21 2002.

   Now testing memory...OK!

   128M    bytes  SDRAM

   8192k  bytes  flash memory

  Press Ctrl-B to enter Boot Menu

  Please input Bootrom password:

  Boot Menu:

     1:  Download application program with XMODEM

     2:  Download application program with TFTP

     3:  Clear application password

     4:  Clear configuration 

     5:  Quit  and reboot 

     Enter your choice(1-5): 2

Please start TFTP server then press ENTER key to get start 

Starting the TFTP download...

.......................................................................

read len = [05802263]

Writing program code to FLASH...

Please waiting,it needs a long time (about 1 min)

WriteFlash Suclearcase/" target="_blank" >ccess.

Press ENTER key to reboot the system .

适用版本vrp1.5/1.6/1.7

quidway start booting出现时迅速按n,多按不限

选择M

选择Y

路由器的ip地址

掩码

pc的ip地址

data.huawei.com网站下载的升级软件的名字

回车

键入C

按ctrl+b

选择2

将版本文件写入flash

回车重启