由于不是官方版本，希望大家作好备份。以下以2.6.0-test9内核做例子，如果安装过程出现问题大家来讨论：
一、已经安装2.4内核官方驱动的方法
1) 下载:
NVIDIA-Linux-x86-1.0-4620-pkg1.run (nvidia)
http://public.pny.com/quadro/FX3000g/Linux/NVIDIA-Linux-x86-1.0-4620-pkg1.run
NVIDIA_kernel-1.0-4620-2.6.diff (minion.de)
http://www.minion.de/files/NVIDIA_kernel-1.0-4620-2.6.diff
2) 安装模块(用 root):
# sh NVIDIA-Linux-x86-1.0-4620-pkg1.run --extract-only
# cd NVIDIA-Linux-x86-1.0-4620-pkg1
# cd usr/src/nv
# patch -p1 < ../../../../NVIDIA_kernel-1.0-4620-2.6.diff
# ln -s Makefile.kbuild Makefile
# make install
这是假定正在运行相关内核，否则还要进行以下操作：
# make KERNDIR=/usr/src/linux-2.6.0-test9 module
# mkdir /lib/modules/linux-2.6.0-test9/kernel/drivers/video
# cp nvidia.ko /lib/modules/linux-2.6.0-test9/kernel/drivers/video
# depmod -a 2.6.0-test9
二、第一次安装
1) 下载:
NVIDIA-Linux-x86-1.0-4620-pkg1.run (nvidia)
http://public.pny.com/quadro/FX3000g/Linux/NVIDIA-Linux-x86-1.0-4620-pkg1.run
NVIDIA-Linux-x86-1.0-4620-pkg#.tar.gz (minion.de)
http://www.minion.de/files/NVIDIA-Linux-x86-1.0-4620-pkg%23.tar.gz
NVIDIA_kernel-1.0-4620-2.6.diff (minion.de)
http://www.minion.de/files/NVIDIA_kernel-1.0-4620-2.6.diff
2) 安装:
*) # sh NVIDIA-Linux-x86-1.0-4620-pkg1.run --extract-only
# cd NVIDIA-Linux-x86-1.0-4620-pkg1
# tar zxf ../NVIDIA-Linux-x86-1.0-4620-pkg#.tar.gz
# cd usr/src/nv
# patch -p1 < ../../../../NVIDIA_kernel-1.0-4620-2.6.diff
# ln -s Makefile.kbuild Makefile
# cd ../../../..
# NVIDIA-Linux-x86-1.0-4620-pkg1/nvidia-installer
也可以建立.run 文件同时运行
# sh NVIDIA-Linux-x86-1.0-4620-pkg0/usr/bin/makeself.sh
--target-os Linux --target-arch x86
NVIDIA-Linux-x86-1.0-4620-pkg1
NVIDIA-Linux-x86-1.0-4620-pkg1.run
"NVIDIA Accelerated Graphics Driver for Linux-x86 1.0-4620"
./nvidia-installer
# sh NVIDIA-Linux-x86-1.0-4620-pkg1.run
三、用脚本安装
1) 下载:
nvidia-installer-1.0.2.tar.gz (nvidia)
ftp://download.nvidia.com/XFree86/nvidia-installer/
nvidia-installer-1.0.2-2.6.diff (minion.de)
http://www.minion.de/files/nvidia-installer-1.0.2-2.6.diff
2) 安装:
# tar zxf nvidia-installer-1.0.2.tar.gz
# cd nvidia-installer-1.0.2
# patch -p1 < ../nvidia-installer-1.0.2
# make
把生成的文件放进nvidia-installer文件里
# uname -r
2.6.0-test9
# sh NVIDIA-Linux-x86-1.0-4620-pkg1.run --kernel-name=2.6.0-test9
good luck!
| big 回复于：2003-12-10 09:52:18 |
| ding一下 |
文章来源于领测软件测试网 https://www.ltesting.net/