[求助]cicser请进……

发布: 2007-6-08 22:43 | 作者: seanhe | 来源: | 查看: 32次 | 进入软件测试论坛讨论

哪位老大可以给解释一下/usr/lpp/cics/bin 里头的命令都是有什么用的……

leezhen 回复于：2002-12-20 19:59:44

cicscp 最常用，功能包括起停 cics dce sfs 等
你打 cicscop 能看到用法

leanron 回复于：2002-12-20 20:34:10

老哥！能say的详细点吗……
waiting...

leezhen 回复于：2002-12-21 18:41:33

cicscp -v start region regionname StartType=cold  启动 region
cicscp -v stop region regionname  停止region
cicscp -v create dce -R            创建dce RPC
cicsadd -r RG1000 -P -c ld LISTENER TCPService="QM0999"  创建listener
cicsadd -r RG1000 -P -c td MQTR ProgName="MQTR" RSLKey=public  创建PD
很多，你打 cicscp  可以看到使用说明

lljj 回复于：2002-12-21 19:49:02

cics的东西很多！我上传了很多！你去fTP上找！

草木皆兵回复于：2002-12-27 13:59:17

这些是有关cicscp的详细命令解释：
general cicscp usage:
cicscp [-?|([<common_options>] [<command> <noun_phrase> <specific_options>])]
where common options are:
        -I         - ignore errors
        -l logfile - log progress messages to file
        -v         - produce more verbose output

Specific commands are:

create DCE RPC-only configuration:
        create dce -R [-n <cell name>]
create DCE client:
        create dce -n <cell name> -s <security server>
create DCE server:
        create dce [-n <cell name>]
destroy DCE:
        destroy dce [-f]
start DCE:
        start dce
stop DCE:
        stop dce
create COBOL:
        create cobol
destroy COBOL:
        destroy cobol
create SNA:
        create sna -d <Control Point Name>
                   -w <Local Network Name>
                   -x <XID Node ID>
                   -y <Link Station Type>
                   [-q <Link Station Name>]
                   [-s <Link Station Address>]
                   [-b <Local Secondary Station Address>]
destroy SNA:
        destroy sna [-f]
start SNA:
        start sna [-f]
stop SNA:
        stop sna [-f]
create te.net server:
        create telnet_server <server> [-P <port>]
                                      [-c <client codeset>]
                                      [-e <emulation>]
                                      [-h <host list>]
                                      [-k <keytab file>]
                                      [-l <locale>]
                                      [-m <model>]
                                      [-n <netname>]
                                      [-p <principal>]
                                      [-r <region>]
                                      [-s <server codeset>]
                                      [-t <transaction>]
destroy telnet server:
        destroy telnet_server <server> [-f]
create SFS server:
        create sfs_server <server> [-m <model>]
                                   [attribute overrides for SSD stanza]
destroy SFS server:
        destroy sfs_server <server> [-f]
start SFS server:
        start sfs_server <server> [attribute overrides for SSD stanza]
stop SFS server:
        stop sfs_server <server> [-f]
create PPC gateway server:
        create ppcgwy_server <server> [-m <model>]
                                      [attribute overrides for GSD stanza]
destroy PPC gateway server:
        destroy ppcgwy_server <server> [-f]
start PPC gateway server:
        start ppcgwy_server <server> [attribute overrides for GSD stanza]
stop PPC gateway server:
        stop ppcgwy_server <server> [-f]
create SNA link:
        create sna_link [<Link Station Name>]
                        -y <Link Station Type>
                        [-s <Link Station Address>]
                        [-b <Local Secondary Station Address>]
destroy SNA link:
        destroy sna_link <Link Station Name> -y <Link Station Type>
create region (SFS):
        create region <region> [-g <group-id>]
                               [-i <infile>]
                               [-l <c|m|o|r>]
                               [-d]
create region (DB2):
        create region <region> [-g <group-id>]
                               [-i <infile>]
                               [-l <c|m|o|r>]
                               [-d]
                               [-a <alias> -o <instance>
                                [-u <user[/passwd]>] [-n|-s]]
                                [-u <user[/passwd]>] [-n|-s]]
create region (ORACLE):
        create region <region> [-g <group-id>]
                               [-i <infile>]
                               [-l <c|m|o|r>]
                               [-d]
                               -o ORACLE
                                [-u <user[/passwd]>
                                 [-x <user/passwd>]]
                                [-t tableSpace] [-s]
destroy region:
        destroy region <region> [-f] [-s [-u <user[/passwd]>]]
start region:
        start region <region> [-d <distributed servers>]
                              [attribute overrides for RD stanza]
stop region:
        stop region <region> [(-c | -f)]
destroy all:
        destroy all [-f]
start all:
        start all
stop all:
        stop all

lljj 回复于：2002-12-27 14:11:35

其实用AIX最好还是用startsrc，stopsrc
在HP=UX上再用cicscp把！不过上面的总结得很好！
可以进精华了！

leanron 回复于：2002-12-27 16:07:51

谢谢各位高人……

leanron 回复于：2002-12-20 19:43:59

leezhen 回复于：2002-12-20 19:59:44

cicscp 最常用，功能包括起停 cics dce sfs 等
你打 cicscop 能看到用法

leanron 回复于：2002-12-20 20:34:10

老哥！能say的详细点吗……
waiting...

leezhen 回复于：2002-12-21 18:41:33

lljj 回复于：2002-12-21 19:49:02

cics的东西很多！我上传了很多！你去fTP上找！

草木皆兵回复于：2002-12-27 13:59:17

这些是有关cicscp的详细命令解释：
general cicscp usage:
cicscp [-?|([<common_options>] [<command> <noun_phrase> <specific_options>])]
where common options are:
        -I         - ignore errors
        -l logfile - log progress messages to file
        -v         - produce more verbose output

Specific commands are:

create DCE RPC-only configuration:
        create dce -R [-n <cell name>]
create DCE client:
        create dce -n <cell name> -s <security server>
create DCE server:
        create dce [-n <cell name>]
destroy DCE:
        destroy dce [-f]
start DCE:
        start dce
stop DCE:
        stop dce
create COBOL:
        create cobol
destroy COBOL:
        destroy cobol
create SNA:
        create sna -d <Control Point Name>
                   -w <Local Network Name>
                   -x <XID Node ID>
                   -y <Link Station Type>
                   [-q <Link Station Name>]
                   [-s <Link Station Address>]
                   [-b <Local Secondary Station Address>]
destroy SNA:
        destroy sna [-f]
start SNA:
        start sna [-f]
stop SNA:
        stop sna [-f]
create telnet server:
        create telnet_server <server> [-P <port>]
                                      [-c <client codeset>]
                                      [-e <emulation>]
                                      [-h <host list>]
                                      [-k <keytab file>]
                                      [-l <locale>]
                                      [-m <model>]
                                      [-n <netname>]
                                      [-p <principal>]
                                      [-r <region>]
                                      [-s <server codeset>]
                                      [-t <transaction>]
destroy telnet server:
        destroy telnet_server <server> [-f]
create SFS server:
        create sfs_server <server> [-m <model>]
                                   [attribute overrides for SSD stanza]
destroy SFS server:
        destroy sfs_server <server> [-f]
start SFS server:
        start sfs_server <server> [attribute overrides for SSD stanza]
stop SFS server:
        stop sfs_server <server> [-f]
create PPC gateway server:
        create ppcgwy_server <server> [-m <model>]
                                      [attribute overrides for GSD stanza]
destroy PPC gateway server:
        destroy ppcgwy_server <server> [-f]
start PPC gateway server:
        start ppcgwy_server <server> [attribute overrides for GSD stanza]
stop PPC gateway server:
        stop ppcgwy_server <server> [-f]
create SNA link:
        create sna_link [<Link Station Name>]
                        -y <Link Station Type>
                        [-s <Link Station Address>]
                        [-b <Local Secondary Station Address>]
destroy SNA link:
        destroy sna_link <Link Station Name> -y <Link Station Type>
create region (SFS):
        create region <region> [-g <group-id>]
                               [-i <infile>]
                               [-l <c|m|o|r>]
                               [-d]
create region (DB2):
        create region <region> [-g <group-id>]
                               [-i <infile>]
                               [-l <c|m|o|r>]
                               [-d]
                               [-a <alias> -o <instance>
                                [-u <user[/passwd]>] [-n|-s]]
                                [-u <user[/passwd]>] [-n|-s]]
create region (ORACLE):
        create region <region> [-g <group-id>]
                               [-i <infile>]
                               [-l <c|m|o|r>]
                               [-d]
                               -o ORACLE
                                [-u <user[/passwd]>
                                 [-x <user/passwd>]]
                                [-t tableSpace] [-s]
destroy region:
        destroy region <region> [-f] [-s [-u <user[/passwd]>]]
start region:
        start region <region> [-d <distributed servers>]
                              [attribute overrides for RD stanza]
stop region:
        stop region <region> [(-c | -f)]
destroy all:
        destroy all [-f]
start all:
        start all
stop all:
        stop all

lljj 回复于：2002-12-27 14:11:35

其实用AIX最好还是用startsrc，stopsrc
在HP=UX上再用cicscp把！不过上面的总结得很好！
可以进精华了！

leanron 回复于：2002-12-27 16:07:51

谢谢各位高人……